“Communication was excellent from my 1st contact with Moe to the completion of the work. This included follow-up messages…”
Christine M. · Glasgow
Google review
If the flat has no gas coming into it, an electric boiler is usually the answer rather than a compromise. No flue, no combustion, nothing to route through a wall. The catch is the incoming electrical supply, which is what actually decides the size of boiler you can have, so that gets checked before anything is quoted.
Tell us what's up, we usually get back within the hour with a clear price.
What is coming into the property decides the size of boiler that is possible. This is the step that most often changes the plan, so it happens first rather than after an order is placed.
Heat load worked out from the rooms and the hot water demand, then checked against what the electrics will actually carry. Both numbers have to work, not just one.
Boiler mounted and the wet side piped in by Mo or David, system flushed and inhibited, then the electrical connection and its certification carried out by a qualified electrician.
Run up, checked under load, controls set up with you, warranty registered and the paperwork from both sides of the job put in your hands before we leave.
Here's what electric boiler installationfrom Mo's team includes.
Every electric boiler installation, fixed price after survey, workmanship guaranteed for 12 months.
City centre and Merchant City flats are the most common case, particularly upper-floor conversions in buildings where gas was never run to every unit, or where it was capped off decades ago. In a lot of these there is no practical route for a gas flue to terminate safely either, which settles the question before running cost even comes into it.
Converted warehouses and newer riverside developments around Tradeston and Finnieston are the second group. Many were designed all-electric from the outset, so there is no gas infrastructure in the building to connect to, and the electrical supply was specified with that in mind, which usually makes these the most straightforward installs we do.
Tenement flats elsewhere in the city are more mixed. Some have gas to every flat, some have it only to the lower floors, and occasionally a flat has been isolated from a supply that still serves its neighbours. Worth checking properly rather than assuming from the building, because reconnecting an existing supply is sometimes cheaper than going electric.
Rural and edge-of-coverage properties out past the city are the classic off-grid case, where there is no mains gas in the area at all. Here the real comparison is usually against oil or LPG rather than mains gas, which changes the running-cost maths considerably and often in electric's favour once you account for deliveries and tank maintenance.
Mo and David cover the heating side of an electric boiler install, which is most of the job, the pipework, the flush, the system balance and the controls. The electrical connection is handled by a qualified electrician rather than by us, and we will not blur that line. It is the same principle Mo has worked to since 1999: do the parts you are genuinely qualified for properly, be straight about the rest, and coordinate it so the customer is not left managing two trades who have never spoken to each other.
Two things come up often enough on these jobs to be worth raising early. The first is the incoming supply, which is the single most common reason an electric boiler plan changes shape, and it is much better discovered at survey than after an order. The second is insulation, because running cost on electric is far more sensitive to heat loss than it is on gas. If a flat has single glazing or an uninsulated solid wall, spending some of the budget on that before upsizing the boiler is usually the better call, and we will say so. Where the property has other gas appliances still connected, those remain Gas Safe work and their certification is unaffected by the boiler changing fuel.
We survey first and give you a fixed price before anything starts. That price is what goes on the invoice. The boiler itself is rarely the variable here. What moves the cost is the electrical supply, because a property already able to carry the load is a straightforward install, while one needing a dedicated circuit, a consumer unit change or a supply upgrade from the network operator carries real extra cost and, in the last case, real extra time. The wet side is priced much like any boiler install, with the flush and inhibitor included as standard rather than added later. We break the electrical element out separately so you can see exactly what is ours and what belongs to the electrician.
This one is simpler than most and it is worth being blunt about. If the property has a working gas supply, fit a gas boiler. Electricity runs at roughly three to four times the unit cost of gas, and no amount of efficiency at the appliance closes a gap that size on a normal heating bill. Electric becomes the right answer, and a genuinely good one, in three situations: there is no gas supply to the building and getting one connected is impractical or expensive, the flat has nowhere a gas flue could safely terminate, or the property is small enough and well-insulated enough that the total heating demand is low regardless of the unit price. If you are in one of those, an electric boiler is quiet, compact, needs no flue and tends to be more reliable. If you are not, we will point you at the gas boiler installation page instead.
Flats and properties without gas across the city and beyond. Find your area:
113 areas · 50-mile radius from Glasgow
Don't see your area? Call 07988 591331, we likely still cover you.
250+ five-star reviews across Google, Trustpilot and Facebook, from real Glasgow customers.
“Communication was excellent from my 1st contact with Moe to the completion of the work. This included follow-up messages…”
Christine M. · Glasgow
Google review
“Our radiator pipe was bent and leaking. They answered straight away… Guy was here an hour later and he was wearing ID, very professional, patient and kind. We just got a new carpet in this room and he done an amazing job on getting little to no water on it. Couldn't recommend enough, price was reasonable.”
Kayleigh A. · Glasgow
Google review
“We lost heating just in time for the coldest day of the year with a baby in the house… When I contacted them they were ready to dispatch that night. Fixed by the afternoon. Quoted that morning and no extra charges were added. Honestly cannot thank them enough.”
Jemma M. · Glasgow
Google review
“As a small business owner, I needed a drainage company that could respond quickly. The team attended first thing in the morning, cleared the blocked drain and carried out a full CCTV survey. All documentation emailed across promptly. Professional, efficient and great value for money.”
Eric V. · Glasgow
Google review
Gas boiler installations in Glasgow by Gas Safe engineers. Sized properly, fitted tidy, warranty registered.
Full central heating systems designed room by room and installed. Boiler, pipework, radiators and controls.
Annual boiler service done to the full manufacturer schedule. Keeps it safe, efficient and the warranty valid.
25 years, 10,000+ jobs, £5m insured, call or WhatsApp, day or night. Clear price, tidy job, guaranteed.